100~800kw CHP Biogas Generator for Biogas Plant

• Customization: Available
• Output Type: AC Three Phase
• Gas Source: Biogas
• Model NO.: 100~800kW
• Certification: ISO
• Power: 20-200kw
• Standard: Standard
• Gas Composition: CH4, CO2
• Transport Package: Standard Export Packing
• Specification: 400V/230V, 50Hz/60Hz
• Trademark: Mingshuo
• Origin: China
• HS Code: 85023900
• Production Capacity: 1000 Sets/ Year

Product Description

100~800kW CHP Biogas Generator for Biogas Plant

Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat.
 

Typical composition of biogas
Compound	Formula	%
Methane	CH4	50-75
Carbon dioxide	CO2	25-50
Nitrogen	N2	0-10
Hydrogen	H2	0-1
Hydrogen sulfide	H2S	0.1 -0.5
Oxygen	O2	0-0.5

Biogas generator is a common device in the utilization of biogas, as it has the characteristics of gen efficiency, energy saving, safety and environmental protection, widely distributed energy at low price.


Requirements & Remark
Before 1m from gas intake pressure regulator, the requirements are as follows:
Gas temperature ≤40 ºC
Gas pressure 2.5~10 kpa
Pressure change rate ≤ 1k Pa/min
Methane content ≥ 50%
Moisture content ≤ 40 g/Nm3, no free water
Impurity size ≤ 5μm, impurity content≤30mg/Nm3
Sulfur content ≤ 200mg/Nm³
NH3 content ≤ 20mg/Nm³

Operation condition:
Temperature: -20 ºC~+40 ºC
Sea level:  < 1000 m
Relative humidity: < 90 %

Technical Parameters of 800kW Biogas Genset

800kW Biogas Generator Set Specifications
Gas Generator		Rated Power	800KW
		Rated Voltage	400V
		Rated Frequency	50/ 60Hz
		Rated Speed	600 rpm
		Dimension (LXWXH)	5800mmX1600mmX3100mm
		Weight(kg)	22000
Gas Engine		Engine Type	In-line, Four Stroke, Electronic Ignition,Trubocharged
		Rated Speed	600 rpm
		Cylinder No.	6 in line
		Bore	300mm
		Start Method	Compressed air
		Crankshaft Rotation Direction	Clockwise (From Flywheel)
		Cooling Method	Open Water Cooling
		Aspiration Type	Trubocharged
		Gas Mixer Formation	Pre-Mix
		Gas Intake Pressure	≥2.5kPa
		Gas Intake Temprature	≤40ºC
		Lubricating oil Consumption (g/Kw·h)	≤0.8
		Max -exhaust Temprature	650ºC
Brushless  Alternator		Alternator Model	800KW
		Rated Voltage	400V
		Rated Speed	600 rpm
		Phase NO.	Three phase
		Power Factor	0.8 (LAG)
		Excitation Type	Brushless
		Insulation Class	H
		Protection Class	IP23

Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007

Contact: Emma Luan
 
Phone: [phone]
Manufacturer & Supplier for Biogas Plant, Desulfurization System, Organic Waste Treatment Equipment etc.