PVDF Flexbile Biofuel Gas Storage Tank Container
Material: PVDF
Temperature: -40ºC ~ +70ºC
Life Time: 10-15 years
Fireproof level: B1
Tensile strength: >4000N/5cm
Gas Storage Capacity: 50-5000m³
Gas utilization rate of the tank: 95%
Anti-H2S corrosion: ≤5000ppm
Working Pressure for Inner Membrane: ≤2000Pa
Working Pressure for Outer Membrane: ≤800Pa
Brief Introduction
For this double membrane gasholder, it's designed and manufactured by our company, so technical support, customized design, instructions on installation and other services can be provided according to your requirements. Flexible holder design and German advanced production technology are adopted to provide safe, reliable gasholder with excellent performance for customers.
Generally this independent double membrane gasholder is a 3/4 sphere, made of special processed polyester material and fixed on the cement foundation by rails. Divided into outer membrane, inner membrane and bottom membrane, the outer membrane is always pressurized to form the shape of gasholder and protect the inner membrane. As a result, rain, snow and wind have little impact on it. Then with the bottom membrane to function as foundation seal to realize the anti-corrosion, anti-leakage and easy installation, this double membrane gasholder is better than traditional wet gasholder both in performance and maintenance. Between the outer membrane and inner membrane, there's a variable-capacity airtight space to store biogas and other gases, such as carbon dioxide, oxygen etc.
Thanks to the high chemical resistance and mechanical strength of the imported materials, the double membrane gasholder satisfies the highest quality standards. With the ability of corrosion, microorganisms and ultraviolet rays resisting, the life time could be as long as 25 years.
Product Composition, Dimensions
| 1. Intelligent pressure gauge |
2. Air |
3. Outer membrane safety valve |
4. Inner membrane safety valve |
| 5. Condenser |
6. Biogas outlet |
7. Check valve |
8. Gas holder |
Accessories
1) Air blower: It blows air into the space between the internal and external membranes of the gas holder to support the gas holder.
2) Check valve: It prevents air filled into the gas holder from flowing reversely.
3) Pressure gauge with electric contact: It measures the pressures of the internal and external membranes.
4) Liquid seal safety tank: It ensures automatic discharge of excess air in case of too high pressure between internal and external membranes of the gas holder.
5) Control cabinet: It automatically controls the startup of the air blower according to the pressure.
| Volume of Inner Membrane(m³) |
Volume of Outer Membrane(m³) |
Diameter of the Node(m) |
Height of the Outer Membrane(m) |
Diameter of the Sphere(m) |
| 100 |
112 |
5.8 |
4.6 |
6.4 |
| 200 |
224 |
7.3 |
5.8 |
8.1 |
| 300 |
336 |
8.3 |
6.7 |
9.3 |
| 500 |
560 |
9.9 |
7.9 |
11.0 |
| 600 |
672 |
10.5 |
8.4 |
11.7 |
| 1000 |
1120 |
12.4 |
10.0 |
13.8 |
| 1500 |
1680 |
14.2 |
11.4 |
15.8 |
| 2000 |
2240 |
15.6 |
12.5 |
17.4 |
| 2500 |
2800 |
16.9 |
13.5 |
18.8 |
| 3000 |
3360 |
17.9 |
14.4 |
19.9 |
| 4000 |
4480 |
19.7 |
15.8 |
22.0 |
| 5000 |
5600 |
21.2 |
17.0 |
23.6 |
The Main Function of the Gas Tank
1. The working pressure of the inner membrane of the gas tank is less than 2.0KPa. The outer membrane is ≤800Pa, while the inner membrane is ≤2000Pa. The gas tank has a pressure resistance of 2.5KPa.
2. The inner and outer membranes of the gas tank are made of imported environmentally-friendly corrosion-resistant Belgian membranes. They're characteristic of anti-corrosion, anti-aging, anti-microbial and anti-ultraviolet. The fire level reaches B1, and the tensile strength of the membrane is 5600 (4000) N/5cm or more. The inner membrane of the gas tank is an anti-corrosion product and can withstand the long-term corrosion of H2S in biogas.
3. The biogas pressure at the outlet of the gas tank is constant, and the gas utilization rate in the tank can reach 95%.
4. The gas cabinet is equipped with a biogas leakage alarm device.
5. The gas cabinet is provided with a reliable safety water seal and pressure relief device to prevent the possible danger caused by overpressure inside the gas tank.
6. The gas tank can resist the strong wind blowing and heavy snow pressure to ensure the safe operation of the equipment. The gas tank pressurizing device is provided with a check valve at the inlet air side to prevent the air from flowing backward.
7. There is an inspection window on the outer membrane of the gas tank, so that the internal condition of the gas tank can be known at any time. The inspection window is made up of 8mm plexiglass plate and flange. It is well sealed, without leakage. The internal working state of the gas tank is observed through the inspection window, so that the gas volume in the gas tank can be known at any time.
8. The gas tank is equipped with a level meter to detect the gas storage height in the inner membrane of the gas tank to ensure the safe operation of the equipment.
Advantages:
1) Higher safety with protection devices
2) No pollution
3) Anti-corrosion, Anti-UV
4) Easy for installation
5) Lower cost
Note: For each double membrane gasholder, it's customized design to accommodate the client's wishes and external factors.
Project Display: 3000m³ X 2 Double Membranes Gas Tanks in Inner Mongolia
Producing, Packing & Installation
Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007
Company Introduction:
Founded in 2004, Shandong Mingshuo New Energy Technology Co., Ltd. is located in Shandong Province, China. With a registered capital of CNY 88 million and an area of over 16 acres, Mingshuo is dedicated to the development, manufacturing, sales and service providing in environmental protection field.
We mainly specialize in organic waste treatment, biogas plant, desulfurization system, biogas purification, biogas utilization and organic fertilizer systems. As the production base of medium and large biogas equipments in China, our company is highly recommended by China Biogas Association, China Association of Rural Energy Industry, and China Import and Export Commodity Website. Our company has passed the quality management system ISO 9001:2015, environment management system ISO 14001:2015 and occupational health & safety management system OHSAS 18001:2007 standards, with professional environmental engineering construction qualification, safety production license in construction field, and qualifications of Class D1, D2 pressure vessel. Moreover, we have obtained more than 30 patents and participated in the formulation of the national standards for biogas desulfurization equipment.
With the unique design, professional R & D team, and pursuit of better solution, we're able to offer the most suitable and customized professional technical consulting, technical supports and after-sale services for all types of customers according to their different requirements and situations. Our products are widely used in biogas, fertilizer, coking, natural gas, city gas, food, ceramics, and other industries.
Contact: Emma Luan
Tel/Fax: +86 532 8576 2582
Phone: +86 176 6023 9752
Manufacturer, Solution Provider & Service Provider for Clients Who's in Need of Treatment Equipment for Animal Excrement, Industrial Wastewater, Solid Organic Waste from Animal Husbandry, Brewing, Winery, Papermaking, Citric Acid, Pharmaceutical, Palm Oil Refinery, Starch, Food, Petrochemical, Municpal Waste and Other Industries. Just for you!
){kind=link}