Production Description
Biogas produced from anaerobic fermentation units, especially at medium or high temperatures, carries a large amount of H2S. Due to the existence of a large amount of water vapor in biogas, the interaction of water and H2S in biogas accelerates the corrosion and clogging of metal pipes, valves and flowmeters. In addition, the SO2 produced by H2S combustion combines with the water vapor in the combustion products to form sulfurous acid, which causes corrosion on the metal surface of the equipment, and also causes pollution to the atmospheric environment and affects human health. Therefore, H2S must be removed before using biogas.
The biogas desulfurization methods include dry desulfurization, wet desulfurization, biological desulfurization.
Characteristic
Dry Desulfurization
1. The structure is simple and easy to use.
2. No duty is required in the work process, and regular replacement is done alternately.
3. The desulphurization rate was higher when the new raw material was used and later decreased.
4. Compared with wet type, it needs add desulfurizer regularly.
5. Higher operation cost.
Wet Desulfurization
1. The equipment can run continuously for a long time and desulphurization is carried out continuously.
2. PH value is used to maintain desulfurization efficiency and low operating cost.
3. Complex process requires special attendant.
4. The equipment need to keep in good repair.
Biological Desulfurization
1. High Efficiency: Hydrogen Sulfide removal rate is higher than 98.5%.
2. High Adaptation Range: Hydrogen Sulfide can be treated higher than 1.5% (15000ppm)
3. Lowest Cost: the lowest operating cost compared with other desulfurization technologies.
4. High Safety: multiple safety protection devices.
5. Unattended: the system is fully automated through on-line monitoring system.
6. Easy to Maintenance: A small amount of maintenance work (such as regular calibration of PH probe).
Micro-Wet Desulfurization
1. Use international advanced technology, domestic original, exclusive production.
2. Avoid the pollution of Dry Desulfurization at the twice time, and high cost.
3. Good for desulfurization process with low gas content and low hydrogen sulfide content.
4. No pollution, low energy consumption, no need to use lye, high desulfurization precision, no need about twice desulphurization.
5. Efficient, quiet operation, simple operation, long service life.
6. Portability, convenient for container transportation.