• 800kw CHP Biogas Natural Gas Generator for STP
  • 800kw CHP Biogas Natural Gas Generator for STP
  • 800kw CHP Biogas Natural Gas Generator for STP
  • 800kw CHP Biogas Natural Gas Generator for STP
  • 800kw CHP Biogas Natural Gas Generator for STP
  • 800kw CHP Biogas Natural Gas Generator for STP

800kw CHP Biogas Natural Gas Generator for STP

Output Type: AC Three Phase
Gas Source: Biogas
Certification: ISO
Power: 20-200kw
Standard: Standard
Gas Composition: CH4, CO2
Customization:
Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
gas generator
Transport Package
Standard Export Packing
Specification
400V/230V, 50Hz/60Hz
Trademark
Mingshuo
Origin
China
HS Code
85023900
Production Capacity
1000 Sets/ Year

Product Description

800kw CHP Biogas Natural Gas Generator for STP
100~800kW CHP Biogas Generator for Biogas Plant


Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat.

 
Typical composition of biogas
Compound Formula %
Methane CH4 50-75
Carbon dioxide CO2 25-50
Nitrogen N2 0-10
Hydrogen H2 0-1
Hydrogen sulfide H2S 0.1 -0.5
Oxygen O2 0-0.5

Biogas generator is a common device in the utilization of biogas, as it has the characteristics of gen efficiency, energy saving, safety and environmental protection, widely distributed energy at low price.

800kw CHP Biogas Natural Gas Generator for STP
Requirements & Remark
Before 1m from gas intake pressure regulator, the requirements are as follows:
Gas temperature ≤40 ºC
Gas pressure 2.5~10 kpa
Pressure change rate ≤ 1k Pa/min
Methane content ≥ 50%
Moisture content ≤ 40 g/Nm3, no free water
Impurity size ≤ 5μm, impurity content≤30mg/Nm3
Sulfur content ≤ 200mg/Nm³
NH3 content ≤ 20mg/Nm³


Operation condition:
Temperature: -20 ºC~+40 ºC
Sea level:  < 1000 m
Relative humidity: < 90 %


800kw CHP Biogas Natural Gas Generator for STP
Technical Parameters of 800kW Biogas Genset
800kW Biogas Generator Set Specifications
Gas Generator Rated Power 800KW
Rated Voltage 400V
Rated Frequency 50/ 60Hz
Rated Speed 600 rpm
Dimension (LXWXH) 5800mmX1600mmX3100mm
Weight(kg) 22000
Gas Engine Engine Type In-line, Four Stroke, Electronic Ignition,Trubocharged
Rated Speed 600 rpm
Cylinder No. 6 in line 
Bore 300mm
Start Method Compressed air
Crankshaft Rotation Direction Clockwise (From Flywheel)
Cooling Method Open Water Cooling
Aspiration Type Trubocharged
Gas Mixer Formation Pre-Mix
Gas Intake Pressure ≥2.5kPa
Gas Intake Temprature ≤40ºC
Lubricating oil Consumption (g/Kw·h) ≤0.8
Max -exhaust Temprature 650ºC
Brushless
 Alternator
Alternator Model 800KW
Rated Voltage 400V
Rated Speed 600 rpm
Phase NO. Three phase
Power Factor 0.8 (LAG)
Excitation Type Brushless
Insulation Class H
Protection Class IP23

Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007

800kw CHP Biogas Natural Gas Generator for STP800kw CHP Biogas Natural Gas Generator for STP
Contact: Emma Luan
 
Phone: +86 176 6023 9752
Manufacturer & Supplier for Biogas Plant, Desulfurization System, Organic Waste Treatment Equipment etc.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now