| Customization: | Available |
|---|---|
| Type: | Centrifuge |
| Object: | Fertilizer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I. Introduction:
The screw extrusion solid liquid separator is a solid liquid separator which works continuously by means of screw extrusion. It is suitable for separating solid particles range from 0.5mm to 1.0mm and material with large solid ratio. It is especially suitable for the treatment of paper mill wastewater and cattle, pigs, chickens and other livestock manure dehydration separation with products of liquid organic fertilizer and solid organic fertilizer. Liquid organic fertilizer can be used directly for crops. Solid organic fertilizer can be used in the area of lack of fertilizer and can be made into organic compound fertilizer through fermentation. It can be used as a compound fertilizer, and can also play a role in improving the soil structure, which is beneficial to the protection of the environment and can produce great economic benefits.
Performance and Characteristics
There are two means to seperate the solid and the liquid: centrifugal separation and extrusion separation.The solid and liquid separation is complete, and the water content of the biogas residue is greatly reduced. Also, the drying time of the biogas residue is reduced and the drying cost is reduced.
The pressure regulation of extruding and separating is convenient through the elastic top tightening device, thus ensuring the solid and liquid separation completely and controlling the water content of the biogas slag, and the flow pipe of the slurry is set up to facilitate the recovery of the biogas liquid respectively in the centrifugal separation section and the extrusion separation section.
The machine has the characteristics of small volume, low speed, simple operation, convenient installation and maintenance, high cost, high efficiency, fast recovery of investment, and no need to add any flocculant.
Key Parameter
1. The feed water content is 80%-90%, and the effluent water content is between 40%-50%.
2. The main body is 304 stainless steel, the main shaft and the spiral blade are 316 stainless steel.
3. The frame is made of channel steel and angle steel.
II. Company Profile:
Mingshuo Group, located in Linqu, Weifang, China, 140km away from Qingdao Port, dedicated in desulfurizer for hydrogen sulfur and equipment manufacturing, products covered iron oxide desulfurizer and hydroxyl iron oxide desulfurizer etc., and equipment covered dry, wet, BDS and iron base etc. With register capital RMB 88 million and more than 200 employees after nearly two decades development, factory occupied more than 100 thousand square meters, and ISO9001, ISO14001 and ISO45001 certificated.
Mingshuo established powerful R&D, cooperated with Beijing University of Chemical Technology, endeavor to build the top brand in desulfurizing area to create value for customers.
Base on "Create infinite by finite", focus on talent growth, Mingshuo endeavor to build high effiency supply chain with advanced equipments and lean management, and gain high reputation from both domestic and overseas' customers.
III. WorkshopIV. Certificate
V. Several Partners:
){kind=link}