Dry Iron Oxide Desulfurizer of Mt Series
The most common method in dry desulfurization is iron oxide desulfurization. By passing the feed gas through the desulfurizer bed at room temperature, the H2S in the feed gas contacts the active iron oxide to generate iron sulfide and ferrous sulfide. When the sulfur content of the outlet gas exceeds the standard, the desulfurizer should be replaced with new ones.
MT series of iron oxide desulfurizer is mainly used for the removal of hydrogen sulfide produced by city coal gas, chemical fertilizer plant, coking plant, citric acid factory, brewery, metallurgy, textile industry, light industry and environmental protection industry. This series of products has the characteristics of convinent operation, fantastic adaptability and small resistance in use.
The principle of desulfurization and regeneration is as follows:
Fe2O3 · H2O+3H2S=Fe2S3· H2O+3H2O
According to the above equation, we can see that the absorption of H2S into Fe2S3 by Fe2O3, with the continuous generation of biogas, ferric oxide absorbs H2S, when the absorption of H2S reaches a certain amount, the removal rate of H2S will be greatly reduced, until the failure.
Fe2S3 can be recycled, and O2 and H2O chemical reaction can be reduced to Fe2O3, the principle is as follows:
2Fe2S3 · H2O+3O2 = 2Fe2O3 · H2O+6S
Combined with the above two reactions, the biogas desulfurization reaction is as follows:
H2S+1/2O2 = S+H2O: (Reaction condition is Fe2O3 · H2O)
From the above chemical reaction equation can be seen, Fe2O3 absorption of H2S into Fe2S3, Fe2S3 to be reduced to Fe2O3, requires O2 and H2O, through the air compressor in the desulfurization tower before adding air to the biogas can meet the desulfurization agent to restore O2 Requirements, biogas contains saturated water can fully meet the desulfurization regeneration of water requirements.
Technical Parameter
| Type |
Appearance |
Specification(mm) |
Breakthrough Sufur Capacity (%) |
strength |
Bulk Density(kg/L) |
| MT-1 |
reddish-brown columnar |
φ3~8*3~20 |
12%-18% |
≥60 |
0.7~0.85 |
| MT-2 |
brown-columnar particles |
φ3~8*3~20 |
20%-25% |
≥55 |
0.75~0.9 |
| MT-3 |
yellow-brown columnar |
φ3~5*3~15 |
30%-38% |
≥50 |
0.8~0.95 |
Using Conditions
| Type |
Applicable Temperature |
Airspeed |
Empty tower linear speed |
Pressure |
The hight-diameter ratio of the bed |
Humidity |
| MT-1 |
20-60 ºC |
500-1500h-1 |
0.10-0.30m/s |
~8MPa |
≥3 |
close to satured water vapor,but it is forbidden to bring water in the bed |
| MT-2 |
10-80 ºC |
500-1500h-1 |
0.10-0.30m/s |
~8MPa |
≥3 |
| MT-3 |
10-80ºC |
500-1500h-1 |
0.10-0.30m/s |
~8MPa |
≥3 |
Product photos
Characteristics & Application
Characteristics and advantages
1) Simple process, small equipment footprint, low initial investment, no high cost needed.
2) High desulfurization efficiency, reliable performance, wide application, both for bulk and fine H2S removal.
3) Gas-solid reaction, no power, water and etc. consumption, easy operation, no daily maintenance needed.
4) Used product is not a hazardous waste, easy for disposal. No wastewater was produced, and no sewage treatment system is needed.
Application: H2S removal from biogas, landfill gas, natural gas, shale gas, oilfield gas, associated gas, blast furnace gas, etc.
Company Profile
Mingshuo Environment Technology Group Co., Ltd. was founded in 2004 and we are a high-tech enterprise focused on development of desulfurization career.
The company's products are divided into two series:Desulfurizer and Desulfurization equipment, the annual production of iron oxide series desulfurizer is 200000 tons. It is mainly used for the purification of sulfur-containing gas in natural gas, petroleum associated gas, coal bed gas, shale gas, blast furnace gas, coke oven gas, biogas and sulfur-containing tail gas from petroleum refining.
The iron oxyhydroxide desulfurizer developed and produced by Mingshuo obtained a number of independent invention patents and has high sulfur penetration capacity. It also has the characteristics of high desulfurization accuracy, fast reaction rate, long service life, and low operating cost. It is widely used in the removal of hydrogen sulfide-containing gases in various industries. The new chelated-iron wet desulfurization equipment developed by Mingshuo has a desulfurization efficiency of 99.99% under normal process conditions, reaching the international advanced level.
The company has passed the ISO management system certification, and Environmental Engineering Professional Construction Qualification. The company has a number of provincial and municipal R&D platforms such as "Shandong Industrial Design Center" and "Shandong Enterprise Technology Center". The company's products have been awarded the titles of "Chinese Green and Eco-friendly Product" "Shandong quality brand products".
Mingshuo has obtained more than 70 patents and participated in the formulation of national desulfurization standards and has independent import and export rights, it has provided a full set of desulfurization system services for more than 1,000 customers in Russia, Canada, the United States and other countries along the Belt and Road.
Mingshuo Group takes "creating value for customers with intentions" as its purpose, and always adheres to the concept of "Mingshuo desulfurization, serving the world". We are willing to go hand in hand with you to create a better future!
Audited Supplier 
){kind=link}