Iron Oxide H2s Adsorbent for Semi-Water Gas

Product Details
Customization: Available
CAS No.: 20344-49-4
Color: Yellow
Still deciding? Get samples of US$ 1/kg
Request Sample
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
96
Year of Establishment
2004-10-14
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
  • Iron Oxide H2s Adsorbent for Semi-Water Gas
Find Similar Products

Basic Info.

Model NO.
MT
Main Substance
Fe2o3
Purity
Min. 98%
Iron Oxide Content
More Than 50%
Particle Size
(3~5) X (5~15) mm
Edgewise Compressive Strength
More Than 50 N/Cm
Bulk Density
0.7-0.9 Kg/L
Transport Package
Pallet
Specification
40kg/bag
Trademark
Mingshuo
Origin
Shandong
HS Code
2821100000
Production Capacity
15000 Tons Per Month

Product Description

Production Description
As a new energy source, biogas is used more and more widely. It is strictly stipulated in the environmental protection standard of our world that the H2S content in biogas gas can not exceed 20mg/m3 when using the biogas energy. It is necessary to remove H2S as much as possible in industrial or civil gases.
Our MT series of Dry Desulfurizer, it is a new variety of desulfurizer developed on the basis of comprehensive study of iron oxide desulfurizer and activated carbon desulfurizer.
Iron Oxide H2s Adsorbent for Semi-Water GasIron Oxide H2s Adsorbent for Semi-Water GasIron Oxide H2s Adsorbent for Semi-Water GasIron Oxide H2s Adsorbent for Semi-Water Gas


Type
MT-1, MT-2, MTZ

Characteristic
MT-1 Type Iron Oxide Desulphurizer at normal temperature: Which is made of ferric oxide as the main active group and added with many different promoter, it has the characteristics of large sulfur capacity, high purification degree, good strength, water not slime, easy regeneration, even in the harsh conditions of anaerobic and ammonia-free, can also remove hydrogen sulfide with high precision, and also have certain removal effect on organic sulfur.

MT-2 Type Compound Iron Oxide Desulphurizer: On the basis of MT-1, a unique production process was used to add a small number of highly active parts with high desulfurization precision, quick reaction speed, wide desulfurization range and large sulfur content under anaerobic conditions.

MTZ Type Biogas Special Desulfurizer: We based on the unique nature of biogas, produce and develop a special high efficiency desulfurizer, with good selectivity, sulfur bulk (Working sulfur capacity is greater than 30%), high desulfurization accuracy, not mud, easy to regenerate.

Iron Oxide H2s Adsorbent for Semi-Water Gas

Scope of Application
Mainly used in urban gas, chemical fertilizer, coking, citric acid, distillery, metallurgy, textile, light industry, electronics, environmental protection and other sectors of biogas, shale gas, water gas, semi water gas, coke oven gas, CH4 gas, liquefied gas, gas, oil gas and other gases.

The principle
The principle of desulfurization and regeneration is as follows:
Fe2O3 · H2O+3H2S=Fe2S3· H2O+3H2O
According to the above equation, we can see that the absorption of H2S into Fe2S3 by Fe2O3, with the continuous generation of biogas, ferric oxide absorbs H2S, when the absorption of H2S reaches a certain amount, the removal rate of H2S will be greatly reduced, until the failure.
Fe2S3 can be recycled, and O2 and H2O chemical reaction can be reduced to Fe2O3, the principle is as follows:
2Fe2S3 · H2O+3O2 = 2Fe2O3 · H2O+6S
Combined with the above two reactions, the biogas desulfurization reaction is as follows:
H2S+1/2O2 = S+H2O: (Reaction condition is Fe2O3 · H2O)
From the above chemical reaction equation can be seen, Fe2O3 absorption of H2S into Fe2S3, Fe2S3 to be reduced to Fe2O3, requires O2 and H2O, through the air compressor in the desulfurization tower before adding air to the biogas can meet the desulfurization agent to restore O2 Requirements, biogas contains saturated water can fully meet the desulfurization regeneration of water requirements.


Technical Parameter
Type Appearance Specification
(mm)
Breakthrough Sulfur Capacity(%) Strength
(N/cm)
Bulk Density(kg/L) Specific Surface Area(m2/g) Sulfur
MT-1 Yellow Circular Strip C.: 3-5
L.: 3-15
≥15 ≥50 0.65-0.75 70 0.1x10-6
MT-2 Brown Circular Strip C.: 3-5
L.: 3-15
≥20 ≥80 0.70-0.80 70 0.1x10-6
MTZ Brown Circular Strip C.: 3-5
L.: 3-15
≥30 ≥80 0.70-0.75 70 0.1x10-6

Condition
Temperature: 10-80°C;
Airspeed: 500-1500h-1;
Linear velocity at Empty tower: 0.10-0.30m/s;
Pressure: 1MPa~8MPa;
Humidity: Close to saturated vapor


Our Campany
Shandong Mingshuo New Energy Technology Co., Ltd. was founded in 2004, which located at No.8 of West Ring Road, Linqu County, Weifang City, Shandong Province. The registered capital is thirty million RMB and an area of more than 100 mu of land. We are focus on the development, manufacture and sale of premium end of the environmental protection complete sets of equipment, also a project system integration and operation service provider.
Our products are divided into five large series, which including: large and medium-sized complete set of biogas equipment and engineering, desulfurization engineering, sewage engineering, organic fertilizer equipment and engineering, automobile exhaust treatment liquid and other environmental protection projects.
We has passed the quality, environment, occupational health and safety "Trinity" management system certification, with environmental engineering professional qualification, construction safety production license, D1, D2 type pressure vessel qualification. 28 patents for invention and utility models have been obtained, and have been involved in the formulation of national standards for biogas desulphurization equipment. We had exported to Asia, Africa, the United States, Europe and Oceania for more than 20 countries and regions, such as Malaysia, Japan, Uzbekistan, Indonesia, Iran, Thailand and Maldives. 
Iron Oxide H2s Adsorbent for Semi-Water Gas

Iron Oxide H2s Adsorbent for Semi-Water Gas

Production
Iron Oxide H2s Adsorbent for Semi-Water Gas


Authentication
Iron Oxide H2s Adsorbent for Semi-Water Gas

Workshop
Iron Oxide H2s Adsorbent for Semi-Water Gas

Exhibition
Iron Oxide H2s Adsorbent for Semi-Water Gas

Parts of our business partners
Iron Oxide H2s Adsorbent for Semi-Water Gas

Our Team
Iron Oxide H2s Adsorbent for Semi-Water Gas

Contact us
Phoenix Liu / Sales Supervisor
Mingshuo Environment Technology Group Co., Ltd.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier